Standard settings to ensure the M9 C 160 silicon injection machine works properly

• Window height :
  2490 mm maximum. (Fig 1, item A)
• Joinery thickness :
  total thickness 160 mm maximum. (Fig 1, item B)
• Water spray thickness :
  not to exceed 20 mm. (Fig 1, item C)
• Fixed sash size :
  minimum width 70 mm. (Fig 1, item D)
• Distance between the double glazing :
  maximum 20 mm. (Fig 1, item E)

• Lap joint :
  The overlap must not exceed 20 mm. (Fig 1, item F)
• Silicon joint angles :
  If you want to ensure proper water flow, the angle of silicon must be equal to, or slightly greater than, the lap joint angle. (Fig 2, item G / Fig 3, poste L)
• Lap joint and glazing bars :
  The optimum angle is between 15° et 20°. (Fig 2, item I)
• Glazing bars :
  The silicon joint reveal and angle must be equal to those of the lap joint. (Fig 2, item H)

• Silicon gutter cross-section :
  It must be the same for the entire perimeter of the joinery. The optimum cross-section is 4x4 mm. (Fig 3, item M)
• Maximum weight :
  The window or French window must not exceed 150 kg. (Fig 1, item B)
• The silicon injection machine cannot operate on arched joinery.
• Side support wheels' position on the window :
  10 mm mini / 100 mm maxi in the event of a rebate on the support edge. (Fig 4, item N-O)
• It is impossible to apply silicon if the joinery's window catches are on the outer perimeter.
• The minimum size of glass pane to be sealed is : 180 x 180 mm.